Specialty Conveyor

ALL TYPES, TORQUE ARM DRIVE KA37 | Torque arm KA37 S235JR electr. galv. R63 x 82.5

SHAFTS, ALL TYPES 400, STEEL DRIVE SHAFT | Shaft drive 42CrMo4 D45 x 619 SV/AF-400

SHAFTS, SPIRALVEYOR 600, STEEL DRIVE SHAFT | SHAFT DRIVE 42CrMo4 D45 x 819 SV-600

ELECTRICAL PARTS, SPIRALVEYOR, MISSING TRANSPORT PLATE DETECTION SYSTEM | Missing slat detection wide track

SHAFT IDLER AISI304 D45 x 422

1100 series full feature controller, 115V, 1 phase, 60 Hz input, 24V DC output, 1.25 amp, reversing. Uncrated weight = 2.25 lbs. (1 kg)

Replacement 1100 series gear set. Includes two drive gears and one idler gear.

GEARMOTOR

1100 Series mid drive type 1 (vertical) mount package, drive is in the A position. Uncrated weight = 0.5 lbs. (0.2 kg).

MOTOR

SLEEVE RING, SPINDLE STANDARD

DISC-GUIDE RAIL MOUNTS FOR A1353-01; INCLUDES 5501328 Bolt hex 8.8 zinc plated M08 x 45 D;56001006 Washer St. zinc plated M08 DIN 125A;30010035 Spacer PBT 30% glassfilled black D37 x 25;55001370 T-slide nut St. zinc plated M8 8E-M8

2200 idler spindle with bearings, 2″

2200 Idler Spindle With Bearing, 6″

2200 idler spindle with bearings, 10″

Drive Spindle Repair Kit for V-Guided Conveyors

DRIVE SPINDLE REPAIR KIT FOR V-GUIDED CONVEYORS, KNURLED

Head Plate, Left Hand.

Head Plate, Right Hand

Tail Nut Bar.

ADJUSTABLE 0-8IN OVERHEAD GUIDE MOUNT BRACKET, 3.75IN WIDE BELT

Tool-less Fully adjustable guide mount assembly.

Spindle,1″X18″Stl/Knurl,W/ Brg.

Spindle,1″X 2″Stl/Knurl,W/ Brg.

Replacement belt for a 2200 Series end drive conveyor with V-guide belt tracking, 1.75in (44mm) wide x 2.00ft (610mm) long with 02 General Purpose with fused finger splice. Uncrated weight = 1lb (0kg). For 22EDM02-020040B010102-XBK00.

REPLACEMENT BELT FOR A 2200 SERIES END DRIVE CONVEYOR WITH V-GUIDE BELT TRACKING, 1.75IN (44MM) WIDE X 4.00FT (1219MM) LONG WITH 02 GENERAL PURPOUSE WITH FUSED FUSED FINGER SPLICE. FOR 22EDM02-040020B010102

Replacement belt for a 2200 Series end drive conveyor with V-guide belt tracking, 3.75in (95mm) wide x 11.00ft (3353mm) long with 59 Color Contrasting with fused finger splice. Uncrated weight = 2lb (1kg).

REPLACEMENT BELT FOR A 2200 SERIES END DRIVE CONVEYOR W/V-GUIDE BELT TRACKING, 10″ WIDE X 8′ LONG WITH 02 GENERAL PURPOSE WITH FUSED FINGER SPLICE

22-180598/02 Replacement belt for a 2200 Series end drive conveyor with manual tracking cams, 18in (457mm) wide x 5.98ft (1823mm) long with 02 General Purpose with fused finger splice. Uncrated weight = 8lb (4kg).

2200 series bearing 240328 (2) pack.

90° shaft eDrive™ variable speed DC gearmotor, .33 Hp (.25kW), 130 volt DC, 250 RPM. Order variable speed controller separately. Uncrated weight = 18 lbs. (8.1 kg).

2200 Series Heavy Load 90 Degree bottom mount package for a mid drive conveyor, mounted in the A position, 44:28 pulley ratio. Uncrated weight = 6lb (3kg)

2200 Series Standard Load 90 Degree bottom mount package for a mid drive conveyor, mounted in the A position, 48:22 pulley ratio. Uncrated weight = 5lb (2kg).

2200 Series Standard Load SEW 90 Degree bottom mount package for a mid drive conveyor, mounted in the A position, 32:28 pulley ratio. Uncrated weight = 5lb (2kg).

2200 SERIES STANDARD LOAD 90 DEGREE BOTTOM MOUNT PACKAGE FOR A END DRIVE CONVEYOR, MOUNTED IN THE A POSITION, 28:28 PULLEY RATIO. UNCRATED WEIGHT = 6LB (3KG).

2200 Series Standard Load 90 Degree bottom mount package for a end drive conveyor, mounted in the A position, 44:32 pulley ratio.

2200 Series Standard Load 90 Degree bottom mount package for a end drive conveyor, mounted in the D position, 44:32 pulley ratio. Uncrated weight = 6lb (3kg).

2200 Series Standard Load 90 Degree bottom mount package for a end drive conveyor, mounted in the A position, 28:28 pulley ratio. Uncrated weight = 6lb (3kg).

2200 Series Standard Load 90 Degree bottom mount package for a end drive conveyor, mounted in the A position, 48:32 pulley ratio. Uncrated weight = 6lb (3kg).

2200 Series Standard Load 90 Degree bottom mount package for a end drive conveyor, mounted in the D position, 32:28 pulley ratio

2200 Series Standard Load 90 Degree bottom mount package for a end drive conveyor, mounted in the A position, 32:28 pulley ratio. Uncrated weight = 6lb (3kg).

200 Series Light Load parallel shaft gearmotor bottom mount package for a end drive conveyor, mounted in the A position, 44:28 pulley ratio. Uncrated weight = 5lb (2kg).

2200 Series Standard Load parallel shaft gearmotor bottom mount package for a end drive conveyor, mounted in the A position, 32:28 pulley ratio

2200 Series mid drive conveyor with V-guide belt tracking, 2.75in (70mm) wide x 3.50ft (1067mm) long, drive shaft in position A with type 01 – low side profile on both sides and belt type 05, Accumulation with fused finger splice. Configuration inc

200 Series mid drive conveyor with V-guide belt tracking, 24in (610mm) wide x 5.00ft (1524mm) long, drive shaft in position A with type 01 – low side profile on both sides and belt type 02, General Purpose with fused finger splice. Configuration include

2200 & 2300 Series eDrive™ adaptor kit to replace an older style (2002-2011) standard load gear reducer / gearmotor on a side drive mounting package. Includes shaft and hardware for mounting an eDrive™ gear reducer

2200 Series Standard Load 90 Degree flush Bottom mount package for a end drive conveyor, mounted in the A position, 28:16 pulley ratio. Uncrated weight = 6lb (3kg).

2200 Series Standard Load 90 Degree flush Bottom mount package for a end drive conveyor, mounted in the A position, 44:16 pulley ratio. Uncrated weight = 6lb (3kg).

2200 Series Standard Load 90 Degree flush Bottom mount package for a end drive conveyor, mounted in the A position, 48:16 pulley ratio.