Filters
MODEL 251 CDLR 2 1/2″ DIA X 11GA ROLLERS ON 4.5″ ROLLER CENTERS24′-0″ OVERALL LENGTH1.5 HP @ 50 FPM (SUPER “E” MOTOR)TOP MOUNTED DRIVE SUPPORTS ON 5′ CENTERS
Outside Radius – 85 1/2¨ 30″ Conveying Surface Remove Motor Drive
60″ Conveying Surface CD-251CDLR-1 hp-63¨ / 45 FPM / Underneath / Right Hand RIGHT HAND UNDERNEATH DRIVE AT THE DISCHARGE END Speed : 45 fpm MC – TEFC – 1
MODEL 251 CDLR 2.5″ DIA X 11GA ROLLLERS ON 4.5′ CENTERS60″ CONVEYING SURFACE; 63″ BF1HP @50FPM SUPER “E” MOTORTOP MOUNTED DRIVE
MODEL 251 CDLR 2 1/2″ DIA X 11GA ON 4.5″ CENTERS60″ EFFECTIVE WIDTH; 63″ BF3/4 HP “SUPER E” MOTOR 50 FPM
54″ Conveying SurfaceCenterDrive-251CDLR-1 hp-57¨ / 50 FPM / Underneath / Right HandRight Hand Underneath DriveSpeed : 50 fpmMC – Super “E” – 1 hp – 230v/460v/3 – 50 FPM – ReversibleLess Supports
MODEL251 CDLR2 1/2″ DIA X 11GA ROLLERS ON 4.5 CENTERS57′ BF X 24′-0″ LONG1 1/2 HP @ 50 FPMTOP MOUNTED DRIVE; SUPER “E” MOTOR
MODEL 251CDLR 54″ CONVEYING SURFACE, 57″ BF, 60″ OAW X APPROXIMATELY 30′-0″ OVERALL LENGTH2.5″ DIA X 11GA ROLLERS ON 4.5″ CENTERS1 HP @ 50 FPM TOP MOUNTED DRIVE
2.5″ CHAIN DRIVEN LIVER ROLLER, 57″ BETWEEN FRAME, 54″ CONVEYING SURFACE, 6″ ROLLER CENTERS, 15′ OAL, LESS DRIVEQ
54″ Conveying Surface CD-251CDLR-1 hp-57¨ / 45 FPM / Underneath / Left Hand LEFT HAND UNDERNEATH DRIVE AT THE DISCHARGE END Speed : 45 fpm
MODEL 251 CDLR 54″ CONVEYING SURFACE57″ BF, 60″ OAW 19′-6″ OVERALL LENGTH1HP @50 FPM TOP MOUNTED DRIVESUPER “E” EFFICIENT MOTOR
MODEL 251 CDLR54″ CONVEYING SURFACE; 60″ OAW2 1/2″ DIA X 11GA ROLLERS ON 6″ CENTERS10′-0″ LONG INTERMEDIATE BEDS
MODEL 251 CDLR 51″ CONVEYING SURFACE2 1/2″ DIA X 11GA ROLLERS ON 6″ CENTERS5′-0″ OVERALL LENTHTOP/ SIDE MOUNTED DRIVE3/4 HPS @ 30 FPM
MODEL 251 CDLR51″ BF X 9′-9″ LONG4.5″ ROLLER CENTERS1HP @ 40 FPM TOP MOUNTED DRIVE
MODEL 251 CDLR45″ BF X 9′-9″ LONG4.5″ ROLLER CENTERS3/4 HP @ 40 FPM TOP MOUNTED DRIVE
MODEL 251 CDLR51″ BF X 4′-10.5″ LONG4.5″ ROLLER CENTERS3/4 HP @ 40 FPM TOP MOUNTED DRIVE
MODEL 251 CDLR, 3″ ROLLER CENTERS, 41″ CONVEYABLE WIDTH, CHAIN BOX ON BOTH SIDES, ELEVATION 30-36, OR 36-48. 1 HP 30FPM
54″ Conveying SurfaceCenterDrive-251CDLR-1 hp-57¨ / 50 FPM / Underneath / Right HandRight Hand Underneath DriveSpeed : 50 fpmMC – Super “E” – 1 hp – 230v/460v/3 – 50 FPM – ReversibleLESS SUPPORTS
ROACH MODEL 251 CDLR2 1/2″ DIA X 11GA ROLLERS ON 6″ CENTERS54″ CONVEYING SURFACE; 57″ BF; 60″ OAW 1 HP @ 50 FPM TOP MOUNTED SUPER “E”
MODEL 251 CDLR 48″ C/S; 51″BF; 54″ OAW X 19′-8″ LONG1 HP PREMIUM EFFICIENT @ 50 FPM
MODEL 251 CDLR, 6″ ROLLER CENTERS, 36″ CONVEYABLE WIDTH, 12′ OVERALL LENGTH, ELEVATION 30-36, OR 36-48. 1 HP 30FPM
MODEL 251 CDLR, 3″ ROLLER CENTERS, 35″ CONVEYABLE WIDTH, 12′ OVERALL LENGTH, CHAIN BOX ON BOTH SIDES, ELEVATION 30-36, OR 36-48. 1 HP 30FPM
MODEL 251 CDLR, 4.5″ ROLLER CENTERS, 36″ CONVEYABLE WIDTH, 12′ OVERALL LENGTH, ELEVATION 30-36, OR 36-48. 1 HP 30FPM
MODEL 251 CDLR 2 1/2″ DIA X 11GA ROLLERS ON 4.5″ CENTERS3/4 HP @ 50 FPM
MODEL 251 CDLR 33″ BF X 53′-0″ LONG2 HP @ 50 FPMINCLUDES NECESSARY SUPPORTS
MODEL 251CDLR30″ CONVEYING SURFACE, 33″ BF9′-9″ OVERALL LENGTH3/4 HP @ 40 FPMSIDE MOUNTED DRIVE
MODEL 251 CDLR 2 1/2′ DIA X 11GA ROLLERS ON 4.5″ CENTERS27″ BF; 24′ CS X 19′-6″ LONG1HP 230460V @ 40 FPM
ROACH MODEL 251CDLR27″ BF X 9′-9″ LONG3/4 HP @ 50FPMMOUNT MOTOR UNDER FRAMESUPER “E” MOTOR
ODEL 251 CDLR 2 1/2″ DIA X 11GA ROLLERS ON 4.5″ ROLLER CENTERS54″ CONVEYING SURFACE; 57″ BF24′-0″ OVERALL LENGTH1.5 HP @ 50 FPM (SUPER “E” MOTOR)TOP MOUNTED DRIVE SUPPORTS ON 5′ CENTERS
24″ CONVEYING SURFACE; 27″ BF; 30″ OAW18 ROLLERS; 58-3/4″ 18 OUTSIDE RADIUS
199 CDLR CONVEYOR; 30″ CS;33″BF6′-0″ DRIVE SECTION90 DEGREE CURVE10′-0″ INTERMEDIATE SECTION
CDLR TREAD ROLLER-8″ OVER ALL WIDTH-1.9″ OD X 12 GA. TUBE-QTY 2 40A18 SPROCKETS
CDLR DRIVE ROLLER-27″ BETWEEN FRAME-1.9″ OD X 12 GA. TUBE-DRIVE SIDE SHAFT EXT
CDLR TREAD ROLLER- 27″ BETWEEN FRAME- 1.9″ OD X 12 GA. TUBE-QTY 2 40A18 SPROCKETS
192CDLR, 4″ RC, 30″ BF, 27″ Conveying Surface, 16’0″ OAL, 1/2 HP INVERTER DUTY MOTOR, 30FPM, TOP DRIVE, INCLUDE SUPPORTS
192CDLR, 4″ ROLL CENTERS, 27″ BF, 24″ CONVEYING SURFACE, 8′ OAL, 1/2HP INVERTER DUTY MOTOR, 5 FPM, TOP DRIVE
192CDLR, 4″ ROLL CENTERS, 27″ BF, 24″ CONVEYING SURFACE, 6′ OAL, 1/2HP INVERTER DUTY MOTOR, 5 FPM, TOP DRIVE
192CDLR, 4″ ROLL CENTERS, 27″ BF, 24″ CONVEYING SURFACE, 18′ OAL, 1/2HP INVERTER DUTY MOTOR, 5 FPM, TOP DRIVE
192CDLR, 4″ ROLL CENTERS, 27″ BF, 24″ CONVEYING SURFACE, 16′ OAL, 1/2HP INVERTER DUTY MOTOR, 5 FPM, TOP DRIVE
MODEL 192CDLR: 3/4 HP TEFC, 40 FPM 36″ OAW, 5′-0″ OVERALL LENGTH, SIDE DRIVE MOUNTED ON RIGHT SIDE1.9′ DIA ROLLERS ON 4′ CENTERS
MODEL 192CDLR: 3/4HPTEFC, 40FPM, 36″OAW, 8′ OAL, DRIVE ON LEFT SIDE DISCHARGE END, STANDARD UNDERSIDE DRIVE
