All Parts

36T IDLE GEAR ASSEMBLY

6MM RAISED – 300MM WIDE BLUE

6MM MICROSPAN PLAIN BLUE CHAIN – CUT TO 150MM WIDE; PER FOOT

6MM MICROSPAN PLAIN BLUE CHAIN – 300MM WIDE-PER FOOT

MICROPAN TRANSFER BELTING;4MM RAISED; CUT TO 300 MM WIDE; PER FOOT

MICROPAN TRANSFER BELTING;4MM RAISED; CUT TO 270 MM WIDE;PER FOOT

12.03″ 300MM X 4MM THICK MICROSPAN REPLACEMENT BELT *PER FOOT*

MICROSPAN SPROCKET ASSEMBLY; 20MM SPOCKET BORE

MICROSPAN SPROCKET; 31.75MM (1.25″) BORE

SPROCKET

6MM PLATED EXTRUSION- NOSEBAR 1290MM

MULTISPAN SPROCKET ASSEMBLY, TOP & BOTTOM HALVES OF THE SPROCKT WITH NO REINFORCEMENT PLATE, SHEAR PIN OR HARDWARE

MULTISPAN SPROCKET ASSEMBLY – 25MM

28.57” DRIVE SHAFT FOR SA47 GEAR MOTOR..DRIVE SHAFT – REF# 14055800-CV#1

28.57” DRIVE SHAFT WITH MICROSPAN TRANSFER EXTENSION, SA47 GEAR MOTOR

DRIVE SHAFT – SA57

DRIVE SHAFT FOR 15.57 WIDE CONVEYOR

DRIVE SHAFT FOR 14.39″ WIDE TUBE TOP CHAIN

DRIVE SHAFT – SA57 WITH MICROSPAN EXTENSION

1203 DRIVE SHAFT, MULTI K63R

DRIVE SHAFT

DRIVE SHAFT – 11041600 – 1085

DRIVE SHAFT FOR SA47 GEARBOX–8.49 STANDARD

DRIVE SHAFT – MICROSPAN EXTENSION – FOR 6.13

CLOSED TOP PLAIN CHAIN – W/NO BARREL ROLLERS – COATED STAINLESS RODS – 12.03″

10.85 4MM STAINLESS COATED CHAIN ROD

HO-BEND CROSSBAR FOR 8.49″ WIDE

SS CROSSBAR–DRIVE/IDLER

SS CROSSBAR FOR STRAIGHT BED–8.49″

RETROREFLECTIVE TARGET RECTANGULAR 51X51

PAN HEAD SCREWS

PULLEY,DR XR40 1″BORE

10FT LG X 21″ BETWEEN FRAME, 2 9/16″ DIA. X 7GA ROLLERS SET HIGH IN 4″ STRUCTURAL CHANNEL FRAME.

GRAVITY ROLLER CONVEYOR – 10’0″ LONG – 84″ BETWEEN FRAME – 2-1/2″ DIA. X 11 GA. MILD STEEL ROLLERS – 7/16″ HEX MILD STEEL AXLE, PIN RETAINED – SEALED, SHIELDED, GREASED BEARINGS – ROLLERS SET 1/4″ HIGH – 3″ ROLLER CENTERS – 4″ X 5.4# ST

MODEL 251 S GRAVITY CONVEYOR9″ BF X 4′-0″ LONG2 1/2″ DIA ON 3″ CENTERS

MODEL 251S STEEL GRAVITY ROLLER9″ BF X 10′-0″ LONG2 1/2″ DIA X 11GA ROLLERS ON 12″ CENTERS4″ X 1 1/2″ X 7GA FRAMES

MODEL 251S2.5″ DIA X 11GA ON 3″ CENTERS7″ BF X 10′-0″ LONG

251S-66-G-421 : 251S TREAD ROLLER WELD ASSY.

251S-66-G : 251S ROLLER ASSEMBLY

251S DRIVE ROLLER WELD ASSEMBLY

251S TREAD ROLLER WELD ASSEMBLY

251S ROLLER ASSEMBLY

MODEL 251S GRAVITY CONVEYOR2.5″ DIA X 11GA ROLLERS ON 3″ CENTERS60″ BF X 5′-0″ LONG

GRAVITY ROLLER, 2 1/2″ DIA. X 11 GA TUBE X 59″ BF, SEMI PRECISION BEARING

251S TREAD ROLLER WELD ASSY.

251S ROLLERS

251S TREAD ROLLER WELD ASSY.

10′-0″ LG X 57′ BF X 2.5″ DIA X 11GA ROLLERS ON 3″ CTRS.

2.5″ GRAVITY ROLLER CONVEYOR WITH ROLLERS ON 6″ CENTERS, 55″ BETWEEN FRAME

10′-0″ LG X 54″ BF X 2.5″ DIA X 11GA ROLLERS ON 3″ CTRS