All Parts

Replacement belt for a 4100 Series end drive conveyor, 5″ (127mm) wide belt x 4′ (1219mm) long, with type 02 standard general purpose belt with fused finger splice.

PE,REFLECTOR 4-3/8″ X 1-1/8″

BELT, 3″CTR POLY-V 3RIB

AquaPruf™ horizontal outrigger mounting sanitary support stand for a 24″ (610mm) wide 7400/7600 conveyor, adjustable height from 35″ to 39″ (889mm – 991mm) top of belt with total locking casters and outriggers. This stand consists of stainless welded

AquaPruf™ horizontal mounting sanitary support stand for a 30″ (762mm) wide 7400/7600 conveyor, adjustable height from 39″ to 43″ (991mm – 1092mm) top of belt with fixed footpads. This stand consists of stainless welded tube construction. and requires

AquaPruf™ horizontal mounting sanitary support stand for a 24″ (610mm) wide 7400/7600 conveyor, adjustable height from 35″ to 39″ (889mm – 991mm) top of belt with total locking casters. This stand consists of stainless welded tube construction and req

Diagonal bracing for H style stands over 30in (762mm) tall.

Diagonal bracing for two-legged H style stands up to 30″ (762mm) tall.

AquaPruf™ 7400/7600 diagonal stand brace 20.5″(521mm) mounting hole center distance

FILLER PLATE,CRV IDLER H LH

FILLER PLATE,CRV IDLER H RH

GAP FILLER PLATE

BEARING HOUSING-FLAT CURVE

Variable speed VFD controller, NEMA 4X enclosure, reversing, 460V, 3 phase, 60 Hz input, 460VAC output, 1.2 amp. Wiring to variable speed controller by customer.

Variable speed VFD controller, NEMA 4X enclosure, reversing, 230V, 3 phase, 60 Hz input, 230VAC output, 2.3 amp. Wiring to variable speed controller by customer. Uncrated weight = 5lb (2kg).

Variable speed VFD controller, NEMA 4X enclosure, reversing, 115V, 1 phase, 60 Hz input, 230VAC output, 2.3 amp. Uncrated weight = 6lb (3kg).

Variable speed VFD controller, NEMA 4 enclosure, reversing, 230V, 3 phase, 60 Hz input, 230VAC output, 2.2 amp. Wiring to variable speed controller by customer. Uncrated weight = 4lb (2kg).

Variable speed VFD controller, NEMA 4 enclosure, reversing, 115V, 1 phase, 60 Hz input, 230VAC output, 2.2 amp. Uncrated weight = 3lb (1kg)

Variable speed full featured controller, 115V, 1 phase, 60 Hz input, 230VAC output, 4 amp

Replacement Heavy load motor, 1.5 Hp (1.11kW), 208-230/460 volt, 3 phase, 60 Hz. Order 3 phase starter separately. Uncrated weight = 34 lbs. (15.5 kg). For gearmotor 32M030EH423FN.

3200 & 3200 LPZ Series eDrive™ adaptor kit to replace an older style (2002-2011) standard load gear reducer / gearmotor on a side drive mounting package. Includes shaft and hardware for mounting an eDrive™ gear reducer (not included). Uncrated weight

3200 Belted & LPZ Belted Series standard load eDrive™ bottom mounting package for an end drive conveyor, mounted in the A position, 18:16 pulley ratio. Uncrated weight = 13 lbs. (5.7 kg).

Heavy load E-Drive 90 Degree VFD Variable Speed gearmotor, .5 Hp (.37kw), 230/460 volt, 3 phase, 15-60 Hz, 22 RPM. Order variable speed controller separately. Uncrated weight = 36lb (16kg

3200 Belted Series standard load 90° shaft eDrive™ variable speed VFD gearmotor, .75 Hp (.55kW) de-rated to .50 Hp (.37kW) for full torque throughout speed range, 230/460 volt, 3 phase, 6-60 Hz, 29 RPM, providing a belt speed of 2.6 – 26 ft/min (0.8 –

Replacement Gear reducer, 30:1 ratio, NEMA 140TC Face. Uncrated weight = 14 lbs. (6.4 kg). For gearmotor 32M030EH423FN.

Heavy load E-Drive 90 Degree Fixed Speed gearmotor, 1.5 Hp (1.1kw), 208-230/460 volt, 3 phase, 60 Hz, 58 RPM. Order 3 phase starter separately. Uncrated weight = 48lb (22kg).

90° shaft variable speed indexing eDrive™ gearmotor, .5 Hp (.37kW), 230/460 volt, 3 phase, 6-60 Hz, 86 RPM. Order variable speed controller separately. Uncrated weight = 21 lbs. (9.6 kg).

Replacement Gear reducer, eDrive, 10:1 ratio, NEMA 42CZ Face. Uncrated weight = 3 lbs. (1.3 kg).

Heavy load E-Drive 90 Degree Fixed Speed gearmotor, .5 Hp (.37kw), 208-230/460 volt, 3 phase, 60 Hz, 345 RPM. Order 3 phase starter separately. Uncrated weight = 20lb (9kg)

Replacement Gear reducer, eDrive, 5:1 ratio, NEMA 56C Face. Uncrated weight = 5 lbs. (2.4 kg).

Replacement belt for a 3200 Series Belted end drive conveyor with V-guide belt tracking, standard 3″ pulley drive tail, 20mm nose bar pulley idler tail , 34″ (864mm) wide belt x 5′ (1,524mm) long, with type 08 standard high friction belt with fused finger

Replacement belt for a 3200 Series Belted end drive conveyor with V-guide belt tracking, standard 3″ pulley drive tail, 20mm nose bar pulley idler tail , 34″ (864mm) wide belt x 5′ (1,524mm) long, with type 05 standard accumulation belt with fused finger

Guard, 3200, side drive, parallel shaft.

BELT, 2.25″CTR POLY-V 2RIB

REPLACEMENT BELT FOR A 2200 SERIES LPZ STANDARD CLEATED BELT CONVEYOR WITH V-GUIDE BELT TRACKING, 6IN(152MM) WIDE X 6.83FT (92082MM) LONG, WITH TYPE A 1IN(25MM) STRAIGHT CLEAT ON 4.03IN (102MM) CENTERS

Conveyor mounting brackets (one pair) for a flat belt conveyor.

Head plate, right hand .

Head plate, left hand.

Replacement belt for a 2200 Series end drive cleated conveyor with V-guide belt tracking, 2.75in (70mm) wide x 4.00ft (1219mm) long, with Type F 0.24in (6mm) straight cleats on 4.87in (124mm) centers. Uncrated weight = 1lb (0kg).

Coupling Ass’Y Universal Flex.

Coupling,Solid,Rnd To Hex,1/2″.

TensionIdler Spindle Kit.

Fixed End V-Guided Spindle Kit, With Drive Shaft

2200 Series universal mount package (up to 21 mounting positions), motor, and drive for an end drive conveyor Includes 300 Watt Transverse Flux motor, NEMA 1/IP20 Transverse Flux controller, 200-240V, 1-phase or 3-phase, 47-63Hz, power cord provided

ROLLER SPINDLER IDLER

CONTROLLER,VFD,230VAC OUT.5HP 115V 1PH IN, NON REVERSING

VARIABLE SPEED VFD CONTROLLER, NEMA 1 ENCLOSURE, NON-REVERSING, 115V, 1 PHASE, 60 HZ INPUT, 230VAC OUTPUT, 0.6 AMP. UNCRATED WEIGHT = 4LB (2KG).

2200 SERIES STANDARD LOAD 90 DEGREE TOP MOUNT PACKAGE FOR A END DRIVE CONVEYOR, MOUNTED IN THE D POSITION, 32:32 PULLEY RATIO. UNCRATED WEIGHT = 6LB (3KG).

2200 SERIES LIGHT LOAD PARALLEL SHAFT GEARMOTOR SIDE MOUNT PACKAGE FOR A END DRIVE CONVEYOR, MOUNTED IN THE A POSITION, UNCRATED WEIGHT = 2LB (1KG).

2200 Series Standard Load 90 Degree side mount package for a end drive conveyor, mounted in the A position, Uncrated weight = 3lb (1kg).