All Parts

4″EndDrive-796RB-39¨ / 1-3/16″ Shaft / Underneath / Left HandSpeed : 70 fpmMC – Super “E” – 1 hp – 230v/460v/3 – 70 FPMETS4-700-39¨ End Take-Up for 796RBPVC-120-36¨ Wide Black PVC-120 Belt5 SM-6-39¨ Medium Duty SupportsInfeed TOB is 39″ Dis

18″ BELT WIDTH, 21″ BF, 24″ OAW8′-0″ OVERALL LENGTH1/2 HP 230/460 V MOTOR END DRIVE

Replacement belt for an AquaPruf™ 7600 Series end drive sanitary 30″ (762mm) wide belt x 20′-6″ (6248mm) long straight conveyor with manual belt tracking standard idler tail, and type 54 FDA edge seal low friction belt with fused finger splice. For conveyor 7AM30-246HHCD154

Replacement belt for an AquaPruf™ 7600 Series end drive sanitary 23.54″ (598mm) wide belt x 15′-2″ (4623mm) long straight conveyor with v-guide belt tracking standard idler tail, and type 70 blue solid urethane belt with fused finger splice

Linking cable kit, quick disconnect for all Dorner control devices6ft (1.83 M) long with mounting hardware for 2200, 3200 and LPZ conveyors

Control stop kit, push to stop / pull to start maintained push button, plastic Nema 12 enclosure and quick disconnect receptacle. Horizontal or vertical mounting for 2200, 3200 and LPZ conveyors. Order linking cable kit separately

DRIVE ASSEMBLY, SERIES, 2200-5MM

AquaPruf™ manual motor starter, 400/460 volt, 3phase, 0.63 – 0.99 amps. Includes wiring to motor when ordered with motor, wiring to starter by others. Uncrated weight = 3 lbs. (1.4 kg)

AquaPruf™ standard load fixed speed totally enclosed non-ventilated gearmotor, 0.5 Hp (0.37kW), 230/460 volt, 3 phase, 60 Hz. The gear reducer and motor are completely stainless steel and are filled with FDA H1 lubricant. The gearmotor turns at 29 RPM. Order motor starter separately.

AquaPruf™ standard load variable speed totally enclosed non-ventilated gearmotor, 1.0 Hp (0.74kW), 208-230/460 volt, 3 phase, 6-60 Hz. The gearmotor is completely stainless steel and are filled with FDA H1 lubricant. The gearmotor turns at 6-58 RPM. Order variable speed controller separately.

Replacement AquaPruf all stainless gear reducer, 20:1 ratio, NEMA 56C Face. Uncrated weight = 23 lbs. (10.4 kg).

Mounting clip for mounting electrical / air routing on conveyor frame. (pack of 10)

NEMA Standard load fixed speed 3 Phase totally enclosed non-ventilated gearmotor, 20:1 Ratio, 87 RPM, 1 Hp, 208-230/460 volt, 3.5-3.2/1.6 FLA, 3 phase, 60 Hz. The gear reducer is aluminum body with FDA sealed surface conversion and filled with FDA H1 l

1/4-20 self drilling DustPruf slot screw with a clamping range 1/8″-1/2″ (3-12mm). (pack of 10)

700SBI-31-5 : 700SB INTERMEDIATE SECTION

700SB INTERMEDIATE BED

700SBI-27-5 : 700SB INTERMEDIATE SECTION

8″CenterDrive-21¨-B / 1-7/16″ Shaft / Underneath / Right HandSpeed : 70 fpmMC – Super “E” – 1 1/2 hp – 230v/460v/3 – 70 FPMFE4-700SBF-21¨ Fixed EndFE4-700SBF-21¨ Fixed EndPVC-120 RT-18¨ BeltLESS SupportsInfeed TOB is 25″ Discharge TOB is

8″CenterDrive-27¨-B / 1-7/16″ Shaft / Underneath / Left HandSpeed : 60 fpmMC – Super “E” – 1 hp – 230v/460v/3 – 60 FPMFE4-700SBF-27¨ Fixed EndFE4-700SBF-27¨ Fixed EndPVC-120 RT-24¨ BeltLESS SupportsInfeed TOB is 36″ Discharge TOB is 60″ I

8″CenterDrive-21¨-B / 1-7/16″ Shaft / Underneath / Left Hand Speed : 60 fpm MC – Super “E” – 1 hp – 230v/460v/3 – 60 FPM FE4-700SBF-21¨ Fixed End FE4-700SBF-21¨ Fixed End PVC-120 RT-18¨ Belt LESS SUPPORTS Infeed TOB is 19″ Discharge TOB i

CD8-39″-B / 1-7/16″ Shaft / Underneath / Right HandRight Hand Underneath DriveMC – TEFC – 1 1/2 HP – 230/460/3 – 90 FPM -RIGHT HANDFE4-700SB-39″ Fixed EndFE4-700SB-39″ Fixed EndPVC-120-36″ Wide Black PVC-120 Belt(10) SM-6-39″ Medium Duty Su

) 700SB 8’ Long X 39”BF Conveyor4″EndDrive-700SB-39¨ / 1-3/16″ Shaft / Underneath / Right Hand EXPLOSION PROOF MOTOR: BALDOR CLASS (1) GROUP (D) / 1/2HP – 230V/460V/3 – 60 FPM Speed : 60 to 69 fpm ( 60 fpm) ETS4-700-39¨ End Take-Up for 700SB “O” SE

700SB 8′ Long | 39″BF Belt Conveyor. * 4″EndDrive-700SB-39¨ / 1-3/16″ Shaft / Underneath / Left Hand * Speed: 60 to 69 fpm (60 fpm) * EXPLOSION PROOF MOTOR: BALDOR CLASS (1) GROUP (D) / 1/2HP 230V/460V/3- 60 FPM * ETS4-700-39¨ En

8″EndDrive-700SB-39¨ / 1-7/16″ Shaft / Underneath / Right HandMC – SUPER “E” – 1HP – 230V/460V/3 – 30 FPMSpeed : 30 fpmETS4-700-39¨ End Take-Up for 700SBPVC-120-36¨ Wide Black PVC-120 Belt

700SB 39″ BF, 48’0″ LONG, 60 FPM, 1 HP SUPER “E” CENTER DRIVE.

700 MEDIUM DUTY SLIDER BED BELT CONVEYOR24″ BELT; 27″ BF X 5′-0″ LONGSIDE MOUNT END DRIVE1/2 HP @ 50 FPM7″ DEEP FRAME

MODEL 700SB24″ BELT WIDTH; 27″ BF X 30′-0″ LONG1 1/2 HP “SUPER E” MOTOR @ 60 FPMCENTER DRIVE WITH 8″ PULLEYCENTER DRIVE

700 MEDIUM DUTY SLIDER BED BELT CONVEYOR24″ BELT; 27″ BF X 3’0″ LONGSIDE MOUNT END DRIVE1/2HP @ 50FPM7″ DEEP FRAME

MODEL 700SB21″ BF X 6′-0″ LONG3/4 HP SUPER “E” @ 70 FPM “LEFT HAND DRIVE”

700SB SLIDER BED, 18″ WIDE ROUGH TOP BELT, 24″ OVERALL WIDTH, 3/4HP 120 VAC MOTOR AT 120 FPM, 6″ HIGH GUARD RAIL BOTH SIDES, SUPPORTS FOR 15″ HIGH INFEED, AND 36″ HIGH DISCHARGE, KNEE BRACES, AND SPACER FOR GEARBOX TO KEEP IT LEVEL

700SB-15-5′, 1/3HP, 60FPM 115 VAC 1 PHASE ODP MOTOR

4″EndDrive-700SB-15¨ / 1-3/16″ Shaft / Underneath / Left HandSpeed : 60 fpm-3/4 HP -230/460/3 EXPLOSION PROOF CLASS 1 GROUP D, CLASS 2 GROUP F & GETS4-700-15¨ End Take-Up for 700SBPVC-120-12¨ Wide Black PVC-120 Belt.Infeed TOB is 36″ Dischar

ED4-700SB-39″ / 1-3/16″ Shaft / Underneath / Right HandRight Hand Underneath DriveMC – TEFC – 3/4 HP -230/460/3-120 FPM – RIGHT HANDETS4-700-39″ End Take-Up for 700SBPVC-120-36″ Wide Black PVC-120 Belt(2) SM-6-39″ Medium Duty SupportsInfeed

ED4-700SB-39¨ / 1-3/16″ Shaft / Underneath / Left Hand Left Hand Underneath Drive Speed : 60 fpm MC – TEFC – 1/2 hp – 230v/460v/3 – 60 FPM – Left Hand

MODEL 700SB 33″ BF X 8′-0″ LONG1/2 HP SUPER “E” @ 70 FPM “LEFT HAND DRIVE”

4″ END DRIVE – 700SB-27″ / 1-3/16″ SHAFT / SIDE MOUNT / LEFT HANDSIDE MOUNTV-GROOVES IN PULLEYSpeed : 50 fpmMC – Super “E” – 1/2 hp – 230v/460v/3 – 50 FPMETS4-700-27¨ End Take-Up for 700SBV-GROOVES IN PULLEYPVC-120-24¨ Wide Black PVC-120

Model 700SB 26´ Long / 27¨ BF 18wd CASTER BASE FULL LENGTH WITH 4″ DIA. RUBBER SWIVEL CASTERS WITH TOE BR

ED4-700SB-39″ / 1-3/16″ Shaft / Underneath / Right HandRight Hand Underneath DriveMC – TEFC – 3/4 HP -230/460/3-120 FPM – RIGHT HANDETS4-700-39″ End Take-Up for 700SBPVC-120-36″ Wide Black PVC-120 Belt(3) SM-6-39″ Medium Duty SupportsInfeed

ED4-700SB-39″ / 1-3/16″ Shaft / Underneath / Right HandRight Hand Underneath DriveMC – TEFC – 3/4 HP -230/460/3-120 FPM – RIGHT HANDETS4-700-39″ End Take-Up for 700SBPVC-120-36″ Wide Black PVC-120 Belt(2) SM-6-39″ Medium Duty SupportsInfeed

ED4-700SB-39″ / 1-3/16″ Shaft / Underneath / Right HandRight Hand Underneath DriveMC-TEFC- 3/4 HP -230/460/3 – 120 FPM – RIGHT HANDETS4-700-39″ End Take-Up for 700SBPVC-120-36″ Wide Black PVC-120 Belt(2) SM-6-39″ Medium Duty SupportsInfeed

ED4-700SB-39″ / 1-3/16″ Shaft / Underneath / Right HandRight Hand Underneath DriveMC – TEFC – 3/4 HP -230/460/3 – 120 FPM – RIGHT HANDETS4-700-39″ End Take-Up for 700SBPVC-120-36″ Wide Black PVC-120 Belt(2) SM-6-39″ Medium Duty SupportsInfe

ED4-700SB-39″ / 1-3/16″ Shaft / Underneath / Right HandRight Hand Underneath DriveMC – TEFC – 3/4 HP -230/460/3-120 FPM – RIGHT HANDETS4-700-39″ End Take-Up for 700SBPVC-120-36″ Wide Black PVC-120 Belt(2) SM-6-39″ Medium Duty SupportsInfeed

50″ WIDE SERIES 900 FLAT TOP PLASTIC BELT, GRAY POLYACETAL, 1/2HP @ 35FPM

700PB / 19″ Belt /21″ BF /45′ 0″ Long19″ Wide Series 900Flat Top Belt, Gray Polypropylene w/Abrasion Rods4.1″ OD Sprockets W/1.5″ Square Bore1 3/16″ Dia Shaft & BearingsRight Hand Side Mounted End Drive2 HP 230/460/3 Ph Super E MotorSpeed:

MODEL 700PB, 30″ WIDE BELT, 31″ BF, 11′ OAL

48″ WIDE BELT SERIES 900 FLAT FRICTION TOP , GRAY POLYPROPYLENE WITH BLACK FRICTION INSERTS, 2 HP @ 35FPM, 36″ HIGH SOLID GUARD RAIL BOTH SIDES

700BSB-39-30′, 39″ BF BELT CONVEYOR 30′ LONG

MODEL 700 BSB, 33″ BF CONVEYOR WITH 30″ BELT, 36″ OVERALL WIDTH, 15′ OVERALL LENGTH, 3/4HP 120FPM

MODEL 700BSB-30-8′

MODEL 700 BSB SLIDER BED BELT CONVEYOR 24″ BELT WIDTH, 27″ BF X 15′-0″ OVERALL LENGTH 1.5 HP @ 60 FPM 230/460V INVERTER READY LEFT HAND DRIVE