All Parts

ROLLER,24CZB 1.9 SNUBBER PRBG-(22BF)

ASY,PNEU-FLTR/REG-1/2″:1/2″ | 160 PSI-L/PRV-W/LOCK-140 SCFM

ORING,83A NBS 7/32 X 19-7/16″

ORING,83A 1/8 X 9-1/4″ BLACK

ORING,83A 1/8 X 8″ CLEAR

RETROREFLECTIVE TARGET RECTANGULAR 51X51

Key,Square, 4mm x 16mm Steel.

Scr,Sock,Metric M6-1.00X70mm.

Scr,Sock,Metric M6-1.00X30mm.

PULLEY,DR XR40 1″BORE

Belt, timing, bottom and top drive, 520mm long.

Belt, timing, bottom and top drive, 460mm long. For 22MBES14A-2828.

Belt, timing, bottom and top drive, 450mm long.

Belt, timing, bottom and top drive, 475mm long. For 22M6BWSA-3228.

TRANSFER PLATE,MODULAR,4.53″ 3 ROWS, BEAD ROLLERS

TRANSFER PLATE,MODULAR,3.35″ 3 ROWS, BEAD ROLLER

Cap, Bearing #205 Closed Cap

Sprocket For Standard 1.00″ Pitch Belt

Spider, 3 Jaw, 2.54 Dia Hytrel.

Spider, 3 jaw, 1.75 dia Hytrel.

Return wear strip material, 1″ UHMW, sold per foot

Bearing, SS, 5/8″ id x 1.57 Sph.

BEARING, BALL, SS 1′ ID SET SCREW

BEARING,BALL,20mmIDx47mmODx14mmWDSEALED

Bearing,Ball 25mmx52mmx15 Seal.

Bearing,Cam Flwr,1.00Diax .62W.

Replacement belt for an AquaPruf™ 7600 Series end drive sanitary 30″ (762mm) wide belt x 20′-6″ (6248mm) long straight conveyor with manual belt tracking standard idler tail, and type 54 FDA edge seal low friction belt with fused finger splice. For conveyor 7AM30-246HHCD154

Replacement belt for an AquaPruf™ 7600 Series end drive sanitary 23.54″ (598mm) wide belt x 15′-2″ (4623mm) long straight conveyor with v-guide belt tracking standard idler tail, and type 70 blue solid urethane belt with fused finger splice

Linking cable kit, quick disconnect for all Dorner control devices6ft (1.83 M) long with mounting hardware for 2200, 3200 and LPZ conveyors

Control stop kit, push to stop / pull to start maintained push button, plastic Nema 12 enclosure and quick disconnect receptacle. Horizontal or vertical mounting for 2200, 3200 and LPZ conveyors. Order linking cable kit separately

DRIVE ASSEMBLY, SERIES, 2200-5MM

AquaPruf™ manual motor starter, 400/460 volt, 3phase, 0.63 – 0.99 amps. Includes wiring to motor when ordered with motor, wiring to starter by others. Uncrated weight = 3 lbs. (1.4 kg)

AquaPruf™ standard load fixed speed totally enclosed non-ventilated gearmotor, 0.5 Hp (0.37kW), 230/460 volt, 3 phase, 60 Hz. The gear reducer and motor are completely stainless steel and are filled with FDA H1 lubricant. The gearmotor turns at 29 RPM. Order motor starter separately.

AquaPruf™ standard load variable speed totally enclosed non-ventilated gearmotor, 1.0 Hp (0.74kW), 208-230/460 volt, 3 phase, 6-60 Hz. The gearmotor is completely stainless steel and are filled with FDA H1 lubricant. The gearmotor turns at 6-58 RPM. Order variable speed controller separately.

Replacement AquaPruf all stainless gear reducer, 20:1 ratio, NEMA 56C Face. Uncrated weight = 23 lbs. (10.4 kg).

Mounting clip for mounting electrical / air routing on conveyor frame. (pack of 10)

NEMA Standard load fixed speed 3 Phase totally enclosed non-ventilated gearmotor, 20:1 Ratio, 87 RPM, 1 Hp, 208-230/460 volt, 3.5-3.2/1.6 FLA, 3 phase, 60 Hz. The gear reducer is aluminum body with FDA sealed surface conversion and filled with FDA H1 l

1/4-20 self drilling DustPruf slot screw with a clamping range 1/8″-1/2″ (3-12mm). (pack of 10)

Shoe, return, plastic chain.

Chain Repair Kit, Type VA chain, 36″ (914mm) wide x 12” (305mm) long.

IDLER SPINDLE, 7600 32″

DRIVE SPINDLE, 7600 32″

Idler puck

Return roller shaft.

Weldment, id bsa 1-7/8 trans lh.

Weldment, id bsa 1-7/8 trans rh.

Bearing aSSy, mod, 3 bolt flange.

Guard,Drive, 6.09 C-C

Support block assembly for .375″ (9.7mm) hex shaft

Tension pin assembly for 5″ wide conveyors.