All Parts

30″W. TM#533 BELT ASSY 213′ 10″

18″W. TM#533 BELT ASSY 17’7″LG WITH 1/2″ X 1/2″ UHMW CLEATS WITH MOUNTING HARDWARE FOR BOLTING ON 12″ CENTERS

36″WD BLACK REPLACEMENT BELT ASSY 185’10”

24″W BS#91 BELT ASSY 10’6″

24″W. PVC120 BELT ASSY 10’0″LG

12″W. PVC120 BELT ASSY 16’6″LG;FOR SO# 457310 / STANDARD LACING

6″W BS#91 BLACK PVC-120 BELT C X FS(.0715 PIW OR .429#’S/FT; NO LACING

24″ WIDE BELT

TAKE- UP BEARING ASSEMBLY

TAKE-UP BEARING ASSY (RH)

TAKE-UP BEARING ASSY (LH)

196S 15″ BF – PR/GR ROLLER

4″ OD DRIVE PULLEY SB-RB-TYPE

4″ OD FIXED END-TK-UP PULLEY

Key,Square, 4mm x 16mm Steel.

Scr,Sock,Metric M6-1.00X70mm.

Scr,Sock,Metric M6-1.00X30mm.

PULLEY,DR XR40 1″BORE

8DB-39-CB : 8″ DRIVE PULLEY ASSEMBLY

8″ DRIVE PULLEY ASSEMBLY

Belt, timing, bottom and top drive, 520mm long.

Belt, timing, bottom and top drive, 460mm long. For 22MBES14A-2828.

Belt, timing, bottom and top drive, 450mm long.

Belt, timing, bottom and top drive, 475mm long. For 22M6BWSA-3228.

TRANSFER PLATE,MODULAR,4.53″ 3 ROWS, BEAD ROLLERS

TRANSFER PLATE,MODULAR,3.35″ 3 ROWS, BEAD ROLLER

Cap, Bearing #205 Closed Cap

Sprocket For Standard 1.00″ Pitch Belt

Spider, 3 Jaw, 2.54 Dia Hytrel.

Spider, 3 jaw, 1.75 dia Hytrel.

Return wear strip material, 1″ UHMW, sold per foot

Bearing, SS, 5/8″ id x 1.57 Sph.

BEARING, BALL, SS 1′ ID SET SCREW

BEARING,BALL,20mmIDx47mmODx14mmWDSEALED

Bearing,Ball 25mmx52mmx15 Seal.

Bearing,Cam Flwr,1.00Diax .62W.

796RB INTERMEDIATE BED

MODEL 796RBF WITH 1.9″ ROLLERS ON 9″ CENTERS, 51″ BF, 54″ OAW, 48″ WIDE BELT (LESS BELT) 1 1/2HP BRAKE MOTOR @ 30FPM

17′-0″ LG X 33″BF INCLINE BELT CONVEYOR30″ ROUGH TOP BELT3/4HP MOTOR 60 FPMCENTER DRIVENOSE OVERFLOOR SUPPORTS

ROLLER BED INCLINDED FLOOR TO FLOOR BELT CONVEYOR24″ BELT WIDTH; 27″ BF X 20′-9″ LONG3/4 HP VFD CENTER DRIVE @ 45 FPM MECHANICAL SPEEDROLLER BED BELT CONVEYORO

7796RBF FLOOR TO FLOOR CONVEYOR 21″ BF, ROLLERS ON 6″ CENTERS, 27′ OAL, WITH DOUBLE NOSEOVER 2′ FROM DISCHARGE END AND 3′ FEEDER ON BOTTOM END. BOTTOM STARTS AT 30″ TOP OF BELT OVERALL DIFFERENCE IN ELEVATION IS 121″, 1 1/2 HP 208-230/460 VAC 3 PHASE

MODEL 796RBF, FLOOR TO FLOOR CONVEYOR, 21″ BF, 24″ OAW, 18″ BELT, 3′ CHAIN DRIVEN FEEDER, 30′ OAL, WITH DOUBLE NOSE OVER, 60FPM, 1 1/2HP 208-230/460 VAC 3 PHASE MOTOR, UNDERSIDE BED COVERS, BELT IS BLACK PVC ROUGH TOP BELT, WITH SUPPORTS FOR 10’1″ FLOO

MODEL 796RBF, FLOOR TO FLOOR CONVEYOR, 21″ BF, 24″ OAW, 18″ BELT, 5′ CHAIN DRIVEN FEEDER, 25′ OAL, WITH DOUBLE NOSE OVER, 60FPM, 1 1/2HP 208-230/460 VAC 3 PHASE MOTOR, UNDERSIDE BED COVERS, BELT IS BLACK PVC ROUGH TOP BELT, WITH SUPPORTS FOR 8’9″ FLOOR

MODEL 796RBF, FLOOR TO FLOOR CONVEYOR, 18″ BF, 21″ OAW, 15″ BELT, 5′ CHAIN DRIVEN FEEDER, 25′ OAL, WITH DOUBLE NOSE OVER, 60FPM, 1 1/2HP 208-230/460 VAC 3 PHASE MOTOR, UNDERSIDE BED COVERS, BELT IS BLACK PVC ROUGH TOP BELT, WITH SUPPORTS FOR 8’9″ FLOOR

8″CenterDrive-15¨-B / 1-7/16″ Shaft / Underneath / Left HandSpeed : 90 fpmMC – Super “E” Brake – 1 hp – 230v/460v/3 – 90 FPMFE4-796RBF-15¨ Fixed EndFE4-796RBF-15¨ Fixed EndPVC-120 RT-12¨ BeltPGC 33´ 9¨ Both Sides Guards3 SM-5-15¨ Medium D

ROACH MODEL 796 RB-27″BF-10′-0″ LONG

MODEL 796RB WITH 1.9″ ROLLERS ON 9″ CENTERS. 51″ BETWEEN FRAME WITH 48″ WIDE BLACK PVC-120 BELT, 3/4HP SUPER E MOTOR @ 60FPM

MODEL 796RB WITH 1.9″ ROLLERS ON 9″ CENTERS. 51″ BF, 54″ OAW, 48″ WIDE BELT. 1 1/2HP SUPER E MOTOR @ 30FPM

4″EndDrive-796RB-39¨ / 1-3/16″ Shaft / Underneath / Left HandSpeed : 70 fpmMC – Super “E” – 1 hp – 230v/460v/3 – 70 FPMETS4-700-39¨ End Take-Up for 796RBPVC-120-36¨ Wide Black PVC-120 Belt5 SM-6-39¨ Medium Duty SupportsInfeed TOB is 39″ Dis

18″ BELT WIDTH, 21″ BF, 24″ OAW8′-0″ OVERALL LENGTH1/2 HP 230/460 V MOTOR END DRIVE