All Parts

BELT; 27″ WIDE; TM#533; 19’7″ OAL W/RN62 ALLIGATOR LACING

1/8″ ORANGE URETHANE COVERING OF 1.9″ DIA 36BF ROLLERS

1/8″ ORANGE URETHANE COVERING OF 1.9″ DIA 22BF ROLLERS

1/8″ ORANGE URETHANE COVERING OF 1.9″ DIA 18BF ROLLERS

1/8″ ORANGE URETHANE COVERING OF 1.9″ DIA 16BF ROLLERS

PULLEY,30CZB DR 2.5 DIA 1/4W

PULLEY,24CZB DR 2.5 DIA 1/4W

PULLEY,18CZB DR 2.5 DIA 1/4W

PULLEY,30CZB 2.5 DIA 1/4W

PULLEY,24CZB 2.5 DIA 1/4W

PULLEY,18CZB 2.5 DIA 1/4W

ROLLER,30CZB 1.9 SNUBBER PRBG-(28BF)

ROLLER,24CZB 1.9 SNUBBER PRBG-(22BF)

ASY,PNEU-FLTR/REG-1/2″:1/2″ | 160 PSI-L/PRV-W/LOCK-140 SCFM

PULLEY, ASY 6″ DIA FLAT FACE;PYB60-ASSY-2-.688

PULLEY,ASY 6″ DIA W/FLANGE;PY70-ASSY-2-.688

ORING,83A NBS 7/32 X 19-7/16″

ORING,83A 1/8 X 9-1/4″ BLACK

ORING,83A 1/8 X 8″ CLEAR

RETROREFLECTIVE TARGET RECTANGULAR 51X51

24″W. PM100R BELT ASSY 16’6″LG

30″W. TM#533 BELT ASSY 213′ 10″

18″W. TM#533 BELT ASSY 17’7″LG WITH 1/2″ X 1/2″ UHMW CLEATS WITH MOUNTING HARDWARE FOR BOLTING ON 12″ CENTERS

36″WD BLACK REPLACEMENT BELT ASSY 185’10”

24″W BS#91 BELT ASSY 10’6″

24″W. PVC120 BELT ASSY 10’0″LG

12″W. PVC120 BELT ASSY 16’6″LG;FOR SO# 457310 / STANDARD LACING

6″W BS#91 BLACK PVC-120 BELT C X FS(.0715 PIW OR .429#’S/FT; NO LACING

24″ WIDE BELT

LINE SHAFT COUPLING

TAKE- UP BEARING ASSEMBLY

TAKE-UP BEARING ASSY (RH)

TAKE-UP BEARING ASSY (LH)

196S 15″ BF – PR/GR ROLLER

4″ OD DRIVE PULLEY SB-RB-TYPE

4″ OD FIXED END-TK-UP PULLEY

PULLEY,DR XR40 1″BORE

8DB-39-CB : 8″ DRIVE PULLEY ASSEMBLY

8″ DRIVE PULLEY ASSEMBLY

796RB INTERMEDIATE BED

MODEL 796RBF WITH 1.9″ ROLLERS ON 9″ CENTERS, 51″ BF, 54″ OAW, 48″ WIDE BELT (LESS BELT) 1 1/2HP BRAKE MOTOR @ 30FPM

17′-0″ LG X 33″BF INCLINE BELT CONVEYOR30″ ROUGH TOP BELT3/4HP MOTOR 60 FPMCENTER DRIVENOSE OVERFLOOR SUPPORTS

ROLLER BED INCLINDED FLOOR TO FLOOR BELT CONVEYOR24″ BELT WIDTH; 27″ BF X 20′-9″ LONG3/4 HP VFD CENTER DRIVE @ 45 FPM MECHANICAL SPEEDROLLER BED BELT CONVEYORO

7796RBF FLOOR TO FLOOR CONVEYOR 21″ BF, ROLLERS ON 6″ CENTERS, 27′ OAL, WITH DOUBLE NOSEOVER 2′ FROM DISCHARGE END AND 3′ FEEDER ON BOTTOM END. BOTTOM STARTS AT 30″ TOP OF BELT OVERALL DIFFERENCE IN ELEVATION IS 121″, 1 1/2 HP 208-230/460 VAC 3 PHASE

MODEL 796RBF, FLOOR TO FLOOR CONVEYOR, 21″ BF, 24″ OAW, 18″ BELT, 3′ CHAIN DRIVEN FEEDER, 30′ OAL, WITH DOUBLE NOSE OVER, 60FPM, 1 1/2HP 208-230/460 VAC 3 PHASE MOTOR, UNDERSIDE BED COVERS, BELT IS BLACK PVC ROUGH TOP BELT, WITH SUPPORTS FOR 10’1″ FLOO

MODEL 796RBF, FLOOR TO FLOOR CONVEYOR, 21″ BF, 24″ OAW, 18″ BELT, 5′ CHAIN DRIVEN FEEDER, 25′ OAL, WITH DOUBLE NOSE OVER, 60FPM, 1 1/2HP 208-230/460 VAC 3 PHASE MOTOR, UNDERSIDE BED COVERS, BELT IS BLACK PVC ROUGH TOP BELT, WITH SUPPORTS FOR 8’9″ FLOOR

MODEL 796RBF, FLOOR TO FLOOR CONVEYOR, 18″ BF, 21″ OAW, 15″ BELT, 5′ CHAIN DRIVEN FEEDER, 25′ OAL, WITH DOUBLE NOSE OVER, 60FPM, 1 1/2HP 208-230/460 VAC 3 PHASE MOTOR, UNDERSIDE BED COVERS, BELT IS BLACK PVC ROUGH TOP BELT, WITH SUPPORTS FOR 8’9″ FLOOR

8″CenterDrive-15¨-B / 1-7/16″ Shaft / Underneath / Left HandSpeed : 90 fpmMC – Super “E” Brake – 1 hp – 230v/460v/3 – 90 FPMFE4-796RBF-15¨ Fixed EndFE4-796RBF-15¨ Fixed EndPVC-120 RT-12¨ BeltPGC 33´ 9¨ Both Sides Guards3 SM-5-15¨ Medium D

ROACH MODEL 796 RB-27″BF-10′-0″ LONG

MODEL 796RB WITH 1.9″ ROLLERS ON 9″ CENTERS. 51″ BETWEEN FRAME WITH 48″ WIDE BLACK PVC-120 BELT, 3/4HP SUPER E MOTOR @ 60FPM